option xdrive < enable | disable > This command is used to control the status of the 'xdrive' option. If the xrive option is enabled then the firmware attempts to use the XAC interface to control the drum, carriage, and z-stage. Think_Motion_Controller The device normally needs to be reset anytime an option is enabled or disabled for the change to take effect. This command is available. Expert 04-Feb-2008 ..\..\ShowAllErrors.htmFirmware 1 Error Index ..\..\ShowAllCommands.htmFirmware 1 Command Index ..\..\ShowAllParameters.htmFirmware 1 Parameter Index Updated: Thu Jul 17 07:25:09 2008 PST